|
The Ajax range of vertical borers is designed to meet the needs of large turning where it is hard
to use a standard lathe when weight is an issue.
The vertical borer is much easier to set up as gravity is on your side not against you.
These machines are built in a traditional manner from cast iron with traditional bearing systems.
Specifications
| Model |
AJVTL 800 |
AJVTL 1250 |
AJVTL 1600 |
AJVTL 2300 |
AJVTL 4000 |
| Max Turned Dia(mm) |
800 |
1,250 |
1,600 |
2,300 |
4,000 |
| Table Diameter (mm) |
720 |
1,000 |
1,400 |
2,000 |
3,600 |
| Max work height(mm) |
800 |
1000 |
1200 |
1,350 |
3,000 |
| Max table load(Kg) |
1,200 |
4,000 |
5,000 |
8,000 |
40,000 |
| Chuch speeds (RPM) |
10-315 |
6.3-200 |
5-160 |
2.5-80 |
0.5 - 50 |
| Number of Speeds |
16 |
16 |
16 |
16 |
2 Vari DC |
| Feed rates(mm/rev) |
0.8-86 |
0.8-86 |
0.8-86 |
0.8-86 |
|
| Number of feeds |
12 |
12 |
12 |
12 |
18 |
| Railhead Ram Vertical Travel(mm) |
650 |
650 |
800 |
800 |
1,500 |
| Railhead Travel Horizontal (mm) |
570 |
700 |
915 |
1,575 |
2,200 |
| Rail Travel Vertical (mm) |
580 |
750 |
900 |
1,350 |
2,800 |
| Side Head Horizontal Travel (mm) |
500 |
600 |
600 |
630 |
N/A |
| Side Head Vertical Travel (mm) |
810 |
900 |
900 |
1,180 |
N/A |
| Main Motor Power (Kw) |
22 |
22 |
22 |
37 |
75 |
| Overall Size (cm) |
208x262x351 |
236x227x280 |
283x267x301 |
321x285x330 |
580x500x460 |
| Net Weight (Kg) |
6,500 |
8,500 |
12,600 |
18,000 |
58,000 |
|
Top of page